100% Original Factory fiber optic termination box - Optical fiber filling Jelly – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Electric Cable Wire , Fiber Optic Line , Air Blown Fiber , The principle of our company is to provide high-quality products, professional service, and honest communication. Welcome all friends to place trial order for creating a long-term business relationship.

100% Original Factory fiber optic termination box - Optical fiber filling Jelly – GELD Detail:

The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabilizers may be incorporated to ensure oxidative stability of the mixture.

● XF-400 is compatible with acrylic resin coatings and polymer materials for fiber and cable applications.

● It is recommended that all polymer materials in contact with the paste be tested for compatibility during use.

● The XF-400 is designed for a cold fill process that avoids voids due to paste shrinkage.

Parameter	Representative Value	Test Method
Appearance	Colorless and Semitransparent	Visual inspection
color stability@ 130°C / 120hrs	<2.5	ASTM127
density (g/ml)	0.83	ASTM D1475
flashing point (°C)	> 200	ASTM D92
dropping point (°C)	>200	ASTM D 566-93
penetration @ 25°C (dmm)	440-475	ASTM D 217
@ -40°C (dmm)	>230	ASTM D 217
viscosity (Pa.s @ 10 s^-1 25°C)	4.8+/-1.0	CR Ramp 0-200 s^-1
(Pa.s @ 200 s^-1 25°C)	2.6+/-0.4	CR Ramp 0-200 s^-1
oil separation @ 80°C / 24 hours (Wt %)	0	FTM 791(321)
volatility@ 80°C / 24 hours (Wt %)	<1.0	FTM 791(321)
oxidation induction time(OIT)@ 190°C (min)	>30	ASTM 3895
acid value (mgKOH/g)	<0.3	ASTMD974-85
Hydrogen evolution amount 80°C/24hours(µl/g)	<0.02
water-resistance (20°C/7days)	pass	SH/T0453a

Product detail pictures:

Related Product Guide:

Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for 100% Original Factory fiber optic termination box - Optical fiber filling Jelly – GELD , The product will supply to all over the world, such as: Kuala Lumpur, Mozambique, Liberia, If any item be of interest to you, you should let us know. We will try our to satisfy your requirements with high quality goods, the lower prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.

By Christine from Venezuela - 2018.09.23 18:44

Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!

By Arthur from Argentina - 2018.06.30 17:29

Write your message here and send it to us