Factory directly supply lc duplex connector - Optical fiber filling Jelly – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

High quality Very first,and Shopper Supreme is our guideline to offer beneficial company to our clients.Nowadays, we're hoping our to be certainly one of professional exporters in our area to satisfy consumers additional will need for Led Fiber Light , Fiber Optic Receiver , Heat Shirink , We welcome new and outdated clients from all walks of daily life to get hold of us for long term organization associations and achieving mutual results!

Factory directly supply lc duplex connector - Optical fiber filling Jelly – GELD Detail:

The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabilizers may be incorporated to ensure oxidative stability of the mixture.

● XF-400 is compatible with acrylic resin coatings and polymer materials for fiber and cable applications.

● It is recommended that all polymer materials in contact with the paste be tested for compatibility during use.

● The XF-400 is designed for a cold fill process that avoids voids due to paste shrinkage.

Parameter	Representative Value	Test Method
Appearance	Colorless and Semitransparent	Visual inspection
color stability@ 130°C / 120hrs	<2.5	ASTM127
density (g/ml)	0.83	ASTM D1475
flashing point (°C)	> 200	ASTM D92
dropping point (°C)	>200	ASTM D 566-93
penetration @ 25°C (dmm)	440-475	ASTM D 217
@ -40°C (dmm)	>230	ASTM D 217
viscosity (Pa.s @ 10 s^-1 25°C)	4.8+/-1.0	CR Ramp 0-200 s^-1
(Pa.s @ 200 s^-1 25°C)	2.6+/-0.4	CR Ramp 0-200 s^-1
oil separation @ 80°C / 24 hours (Wt %)	0	FTM 791(321)
volatility@ 80°C / 24 hours (Wt %)	<1.0	FTM 791(321)
oxidation induction time(OIT)@ 190°C (min)	>30	ASTM 3895
acid value (mgKOH/g)	<0.3	ASTMD974-85
Hydrogen evolution amount 80°C/24hours(µl/g)	<0.02
water-resistance (20°C/7days)	pass	SH/T0453a

Product detail pictures:

Related Product Guide:

Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science as well as theory of quality the basic, have faith in the initial and administration the advanced for Factory directly supply lc duplex connector - Optical fiber filling Jelly – GELD , The product will supply to all over the world, such as: Frankfurt, Milan, Croatia, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a people-oriented, meticulous manufacturing, brainstorm, construct brilliant organization. hilosophy. Strict high quality management, whole heartedly service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we've been likely to be pleased to serve you.

Fiber Optic Cable Installation

Fiber Optic Light

Fiber Optic Modems

Fiber Optic Power Meter

Fiber Optic Receiver

Fiber Reinforced Plastic

Single Mode Optical Fiber

Smooth Frp Panels 4x8

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!