Free sample for optical distribution point - Optical fiber filling Jelly – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

With advanced technologies and facilities, strict good quality manage, reasonable rate, superior assistance and close co-operation with shoppers, we have been devoted to supplying the very lower price for our consumers for Single Mode Optical Fiber , Cable Clips Metal , Fiber Optic Mpo Patch Cord , Besides, our company sticks to high quality and reasonable price, and we also offer good OEM services to many famous brands.

Free sample for optical distribution point - Optical fiber filling Jelly – GELD Detail:

The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabilizers may be incorporated to ensure oxidative stability of the mixture.

● XF-400 is compatible with acrylic resin coatings and polymer materials for fiber and cable applications.

● It is recommended that all polymer materials in contact with the paste be tested for compatibility during use.

● The XF-400 is designed for a cold fill process that avoids voids due to paste shrinkage.

Parameter	Representative Value	Test Method
Appearance	Colorless and Semitransparent	Visual inspection
color stability@ 130°C / 120hrs	<2.5	ASTM127
density (g/ml)	0.83	ASTM D1475
flashing point (°C)	> 200	ASTM D92
dropping point (°C)	>200	ASTM D 566-93
penetration @ 25°C (dmm)	440-475	ASTM D 217
@ -40°C (dmm)	>230	ASTM D 217
viscosity (Pa.s @ 10 s^-1 25°C)	4.8+/-1.0	CR Ramp 0-200 s^-1
(Pa.s @ 200 s^-1 25°C)	2.6+/-0.4	CR Ramp 0-200 s^-1
oil separation @ 80°C / 24 hours (Wt %)	0	FTM 791(321)
volatility@ 80°C / 24 hours (Wt %)	<1.0	FTM 791(321)
oxidation induction time(OIT)@ 190°C (min)	>30	ASTM 3895
acid value (mgKOH/g)	<0.3	ASTMD974-85
Hydrogen evolution amount 80°C/24hours(µl/g)	<0.02
water-resistance (20°C/7days)	pass	SH/T0453a

Product detail pictures:

Related Product Guide:

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Free sample for optical distribution point - Optical fiber filling Jelly – GELD , The product will supply to all over the world, such as: Gambia, Netherlands, Georgia, We have to continue to uphold the quality, comprehensive, efficient business philosophy of honest, responsible, innovativespirit of service, abide by the contract and abide by reputation, high quality products and improve service welcome overseas customers patrons.

Dvp 740 Fusion Splicer

Fiber Cable Connector

Fiber Joint Box

Fiber Optic Coupler

Fiber Optic Patch Panel

Fiber Patch Cord Types

G657b3

Lc To Lc Coupler

Om3 Multimode Fiber

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!