Good Quality “Extrusion Process ” - Optical fiber filling Jelly – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

Our pursuit and company intention is usually to Always fulfill our purchaser requirements. We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Fiber Optic System , Ftth Anchor Accessories , Fiber Optic Led , Welcome to visit our company and factory. Please feel free to get in touch with us if you need any further assistance.

Good Quality “Extrusion Process ” - Optical fiber filling Jelly – GELD Detail:

The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabilizers may be incorporated to ensure oxidative stability of the mixture.

● XF-400 is compatible with acrylic resin coatings and polymer materials for fiber and cable applications.

● It is recommended that all polymer materials in contact with the paste be tested for compatibility during use.

● The XF-400 is designed for a cold fill process that avoids voids due to paste shrinkage.

Parameter	Representative Value	Test Method
Appearance	Colorless and Semitransparent	Visual inspection
color stability@ 130°C / 120hrs	<2.5	ASTM127
density (g/ml)	0.83	ASTM D1475
flashing point (°C)	> 200	ASTM D92
dropping point (°C)	>200	ASTM D 566-93
penetration @ 25°C (dmm)	440-475	ASTM D 217
@ -40°C (dmm)	>230	ASTM D 217
viscosity (Pa.s @ 10 s^-1 25°C)	4.8+/-1.0	CR Ramp 0-200 s^-1
(Pa.s @ 200 s^-1 25°C)	2.6+/-0.4	CR Ramp 0-200 s^-1
oil separation @ 80°C / 24 hours (Wt %)	0	FTM 791(321)
volatility@ 80°C / 24 hours (Wt %)	<1.0	FTM 791(321)
oxidation induction time(OIT)@ 190°C (min)	>30	ASTM 3895
acid value (mgKOH/g)	<0.3	ASTMD974-85
Hydrogen evolution amount 80°C/24hours(µl/g)	<0.02
water-resistance (20°C/7days)	pass	SH/T0453a

Product detail pictures:

Related Product Guide:

Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Good Quality “Extrusion Process ” - Optical fiber filling Jelly – GELD , The product will supply to all over the world, such as: Sheffield, Salt Lake City, azerbaijan, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and perfect service . We also warmly welcome customers to visit our company and purchase our products.

Active Optical Network

Ethernet Over Fiber

Fiber Optic Network Cable

Fiber Optic Power Meter

Fiber Optic Splicer

Fiberglass Wall Panels

Fo Patch Panel

Sc To Lc Adapter

The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!