OEM Factory for om1 om2 om3 - Single-mode G657B3 super bending resistant optical fiber – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Fiber Reinforced Plastic , Lc To Lc Fiber Optic Cable , Fiber Optic Fbt Splitter , We're prepared to present you with effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.

OEM Factory for om1 om2 om3 - Single-mode G657B3 super bending resistant optical fiber – GELD Detail:

● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber.

● Low attenuation, meeting the communication requirements of O-E-S-C-L band.

● Used in various optical cables including ribbon cables, it has extremely low bending additional loss.

● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency.

● High dynamic fatigue parameters ensure the service life under ultra-small bending radius.

Production pictures (4)
Production pictures (1)
Production pictures (3)

1. Optical fiber jumpers of various structures

2. FTTX high-speed optical routing

3. Optical cable with small bending radius

4. Small-size optical fiber device and optical device

Product packaging
Product packaging (2)
Product packaging (1)

Characteristics		Conditions	Units	Specified values
Optical Characteristics
Attenuation		1310nm	dB/km	≤0.35
		1383nm	dB/km	≤0.35
		1550nm	dB/km	≤0.21
		1625nm	dB/km	≤0.23
Attenuation vs. Wavelength Max. A difference		1285~1330nm, @1310nm	dB/km	≤0.03
Attenuation vs. Wavelength Max. A difference		1525~1575nm, @1550nm	dB/km	≤0.02
Zero Dispersion Wavelength(λ₀)		–	nm	1300~1324
Zero Dispersion Slope(S₀)		–	ps/(nm2·km）	≤0.092
（PMD)	Max. Individual Fiber	–	ps/√km	≤0.1
	Link Design Value（M=20，Q=0.01%)	–	ps/√km	≤0.06
	Typical value	–	ps/√km	0.04
Cable cut-off wavelength（λ_cc)		–	nm	≤1260
Mode Field Diameter（MFD)		1310nm	μm	8.2~9.0
Mode Field Diameter（MFD)		1550nm	μm	9.1~10.1
Effective Group Index of Refraction(Neff)		1310nm		1.468
Effective Group Index of Refraction(Neff)		1550nm		1.469
Point discontinuity		1310nm	dB	≤0.05
Point discontinuity		1550nm	dB	≤0.05
Geometrical Characteristics
Cladding Diameter		–	μm	125.0±0.7
Cladding Non-Circularity		–	%	≤0.7
Coating Diameter		–	μm	235~245
Coating-Cladding Concentricity Error		–	μm	≤12.0
Coating Non-Circularity		–	%	≤6.0
Core-Cladding Concentricity Error		–	μm	≤0.5
Curl(radius)		–	m	≥4
Delivery Length		–	km per spool	Max. 50.4
Mechanical Specifications
Proof Test		–	N	≥9.0
		–	%	≥1.0
		–	kpsi	≥100
Macro-bend Induced Loss	1Turn Around a Mandrel of 10mm Radius	1550nm	dB	≤0.03
	1 Turn Around a Mandrel of 7.5mm Radius	1625nm	dB	≤0.1
	1 Turn Around a Mandrel of 7.5mm Radius	1550nm	dB	≤0.08
	1 Turn Around a Mandrel of 7.5mm Radius	1625nm	dB	≤0.25
	1 Turn Around a Mandrel of 5mm Radius	1550nm	dB	≤0.15
	1 Turn Around a Mandrel of ,5mm Radius	1625nm	dB	≤0.45
Coating stripping force		Typical average value	N	1.5
Coating stripping force		Peak value	N	1.3~8.9

Product detail pictures:

Related Product Guide:

Our commission is to serve our buyers and purchasers with effective good quality and aggressive portable digital goods for OEM Factory for om1 om2 om3 - Single-mode G657B3 super bending resistant optical fiber – GELD , The product will supply to all over the world, such as: moldova, Burundi, Venezuela, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Fiber Optic Sensor