Original Factory fiber optic power meter - Optical fiber filling Jelly – GELD

Short Description:

Product Detail

Product Tags

Feedback (2)

Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Fiber Optical Joint Box , Active Optical Network , Q Span Clamp , With our rules of small business standing, partner trust and mutual benefit, welcome all of you to definitely do the job alongside one another , grow together.

Original Factory fiber optic power meter - Optical fiber filling Jelly – GELD Detail:

The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabilizers may be incorporated to ensure oxidative stability of the mixture.

● XF-400 is compatible with acrylic resin coatings and polymer materials for fiber and cable applications.

● It is recommended that all polymer materials in contact with the paste be tested for compatibility during use.

● The XF-400 is designed for a cold fill process that avoids voids due to paste shrinkage.

Parameter	Representative Value	Test Method
Appearance	Colorless and Semitransparent	Visual inspection
color stability@ 130°C / 120hrs	<2.5	ASTM127
density (g/ml)	0.83	ASTM D1475
flashing point (°C)	> 200	ASTM D92
dropping point (°C)	>200	ASTM D 566-93
penetration @ 25°C (dmm)	440-475	ASTM D 217
@ -40°C (dmm)	>230	ASTM D 217
viscosity (Pa.s @ 10 s^-1 25°C)	4.8+/-1.0	CR Ramp 0-200 s^-1
(Pa.s @ 200 s^-1 25°C)	2.6+/-0.4	CR Ramp 0-200 s^-1
oil separation @ 80°C / 24 hours (Wt %)	0	FTM 791(321)
volatility@ 80°C / 24 hours (Wt %)	<1.0	FTM 791(321)
oxidation induction time(OIT)@ 190°C (min)	>30	ASTM 3895
acid value (mgKOH/g)	<0.3	ASTMD974-85
Hydrogen evolution amount 80°C/24hours(µl/g)	<0.02
water-resistance (20°C/7days)	pass	SH/T0453a

Product detail pictures:

Related Product Guide:

Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Original Factory fiber optic power meter - Optical fiber filling Jelly – GELD , The product will supply to all over the world, such as: Brisbane, Jersey, Berlin, Now, we professionally supplies customers with our main merchandise And our business is not only the buy and sell, but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.

Adss Fiber Optic Cable