Featured

  • Low MOQ for optical to ethernet converter - G.652D Single-mode optical fiber (B1.3)  – GELD

    Low MOQ for optical to ethernet converter - G.652D Single-mode optical fiber (B1.3) – GELD

    1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of optical fiber include: fiber optical systems requiring low loss and high bandwidth, such as long-distance communication, trunk lines, loop feeders, distribution lines and cable TV, etc., especially suitable for 1383nm band coarse wavelength division multiplexing (CWDM), dense wavelength division multiplexing (DWD...
  • Fwdm Dwdm Wdm Cwdm Module CWDM, DWDM, FWDM Device  – GELD

    Fwdm Dwdm Wdm Cwdm Module CWDM, DWDM, FWDM Device – GELD

    Parameter CWDM Device Operating Wavelength (nm) 1260~1620nm Center Wavelength (nm) 1270~1610nm or 1271~1611nm (ITU Grid G.694.2) Channel Spacing (nm) 20nm Center Wavelength Accuracy (nm) ±0.5nm Bandwidth @ -0.5db (db) ≥13db Insertion Loss (db) Pass port:  ≤ 0.60db Reflect port: ≤ 0.40db Isolation@ Pass Channel (db) Adjacent: ≥ 30db Non-Adjacent: ≥ 40db Isolation@ Reflect Channel (db) ≥13db Directive (db) ≥50db Optical Ret...
  • Well-designed Wooden Cable Reel - Optical fiber secondary plastics production line  – GELD

    Well-designed Wooden Cable Reel - Optical fiber secondary plastics production line – GELD

    Number of fiber cores: 12core Fiber cabling tension: 0.4~1.2N±0.05N Optical fiber pay-off: Ф236×Ф160×108 mm; Ф265×Ф160×250 mm take-up tension: 2.5~12N Structural speed of production line: 700 m/min Normal production rate: Φ1.8mm production speed 550m/min. (6-core fiber beam tube); Φ2.5mm production speed 400m/min. (12-core fiber beam tube) Length meter error: < 0.5‰ Wire diameter fluctuation: 0.02mm Take-up bobbins: PN800mm Optical fiber additional attenuation: G652D<0.005db/km(mean) Pr...
  • New Delivery for fiber optic box - Polyamide  – GELD

    New Delivery for fiber optic box - Polyamide – GELD

    By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as microcry stallinity. Because of its crystallinity, the microcrystalline structure retains important properties such as stress cracking resistance — without clouding. The degree of crystallinity is so negligible, however, that it has no adverse effec...
  • Fiber Optic Small Box Fiber Outdoor Waterproof Pigtail   – GELD

    Fiber Optic Small Box Fiber Outdoor Waterproof Pigtail – GELD

    1. Adapt to all type of connector  2. Well water proof and used in outdoor environments  3. Meet to the China optical commucation division standard 4. Easily mounted and high reliability  5. The number of the core is customized 1. Long Distance Optical Communication System 2. FTTP 3. Telecommunication Network 4. CATV Network 5. Local Area Network 6. Active device termination 7. Data system network 8. FTTH CATV Optic fiber waterproof pigtail 9. water proof cables includes 4c, 6c,8c; SM, MM,ST,...
  • Manufactur standard lc lc patch cord - G.652D Single-mode optical fiber (B1.3)  – GELD

    Manufactur standard lc lc patch cord - G.652D Single-mode optical fiber (B1.3) – GELD

    1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of optical fiber include: fiber optical systems requiring low loss and high bandwidth, such as long-distance communication, trunk lines, loop feeders, distribution lines and cable TV, etc., especially suitable for 1383nm band coarse wavelength division multiplexing (CWDM), dense wavelength division multiplexing (DWD...
  • Factory directly Galvanized Steel Pole Brancket - Optical fiber heat shrinkable tube  – GELD

    Factory directly Galvanized Steel Pole Brancket - Optical fiber heat shrinkable tube – GELD

    Transparent plastic tube Stainless steel rod Prevents stress and protects fusion fiber optic splices in field and factory operations Sleeves are made of ethylene vinyl acetate (EVA) Sleeves have heat-activated memory which causes them to shrink under heat Sleeves shrink tightly to exclude air and hold the rod firmly, preventing abrasion of delicate glass fibers 1. Consist of cross-linked polyolefin, hot fusion tubing and stainless reinforved steel rod (quartz or ceramic). 2. Keep optical tran...
  • 100% Original Factory fiber optic termination box - Optical fiber filling Jelly  – GELD

    100% Original Factory fiber optic termination box - Optical fiber filling Jelly – GELD

    The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz...
  • Optical Fibre Broadband Fiber Outdoor Waterproof Pigtail   – GELD

    Optical Fibre Broadband Fiber Outdoor Waterproof Pigtail – GELD

    1. Adapt to all type of connector  2. Well water proof and used in outdoor environments  3. Meet to the China optical commucation division standard 4. Easily mounted and high reliability  5. The number of the core is customized 1. Long Distance Optical Communication System 2. FTTP 3. Telecommunication Network 4. CATV Network 5. Local Area Network 6. Active device termination 7. Data system network 8. FTTH CATV Optic fiber waterproof pigtail 9. water proof cables includes 4c, 6c,8c; SM, MM,ST,...
  • Chinese wholesale Aerial Cable Wall Anchoring Point - Metal Cable Drop Wire Tension Clamps  – GELD

    Chinese wholesale Aerial Cable Wall Anchoring Point - Metal Cable Drop Wire Tension Clamps – GELD

    The installation of this FTTH drop clamp is very easy and convenient, self- adjusting wedges, which provide the tool free installation, and easy attaching of fiber optic cable by hands. Just need to put a appropriate size flat cable on the shell, put the raised embossing shim against cable then insert wedge in shell, at last attach this clamp on drop wire hook or bracket. FTTH drop clamps passed a series of standard related type tests which are available in our internal laboratory, such as +7...
  • OEM Customized adss fiber optic cable - Non-conductive Film Laminated WBT Water Blocking Tape For Cables  – GELD

    OEM Customized adss fiber optic cable - Non-conductive Film Laminated WBT Water Blocking Tape For Cables – GELD

    Water blocking tapes and water swellable tapes offer premium performance benefits during the critical first minute of response to water. The use and blending of superior super absorbent polymers (SAP) contributes significantly to enhanced performance. Some of the features and benefits of using water-blocking tapes are: ● Seawater blocking capability ● Fast swell ● Suitable for direct fibre contact ● High yield ● Suitable for fast processing ● Low electrical resistance ● Good cushioning proper...
  • Factory supplied “Optical Fiber Secondary Coating ” - G.652D Single-mode optical fiber (B1.3)-Grade B  – GELD

    Factory supplied “Optical Fiber Secondary Coating ” - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD

    ● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib...