Featured
-
China New Product Opticial Cable - Wire Cable Thimbles – GELD
Standard Duty Thimbles are good for the light duty rigging applications. Even with the zinc plating to help resist corrosion, these rope thimbles will be ideally suited for indoor or low-corrosive environments. A thimble is a grooved metal fitting that is manufactured to protect the fastening loop of a wire rope sling. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Greater protection a... -
High Quality sfp fiber module - G.657A2 Bent-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● O-e-s-c-l for full band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D networks. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; Especially suitable for MAN soft optical... -
Factory selling Fustin Splice Sleeve - C Type Drop Cable Clamp Draw Hook – GELD
The c type hook clamp is used as an accessory for outdoor or indoor wall fiber access. The main purpose is to form an anchor on the wall for the erection and support of the fiber. The hanging part rotates more than 180 degrees, so the wire It can only fall off manually, and the wire will not be unhooked even in a strong wind environment. The installation apertures of the c-type hook are 6mm and 8mm respectively, and expansion matches are required. C type drop cable clamp draw hook is a wall-m... -
OEM Factory for om1 om2 om3 - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Factory directly supply lc duplex connector - G.657A1 Bending-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● ”O – E – S – C – L for all band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D network. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; It ... -
Ordinary Discount Tension Flat Cable Clamp - Single/double layer Steel Wire Tension Clamp – GELD
1. Twine the wire in accordance the “8” shape along the disc at the center of the wire clamp, then reverse tighten the wire at the tail 2. And then the connection handle in accordance with the “eight” word coiling bending end knot 3. Fix long core round plate bundle, auxiliary parts and lines by nylon thread screw Connect the steel wire in a single self-supporting leather fiber optic cable with the anchor point, and the span length shall not be longer than 100m. 1. It can facilita... -
Manufactur standard lc lc patch cord - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Low price for Cable Clips Metal - Metal Cable Drop Wire Tension Clamps – GELD
The installation of this FTTH drop clamp is very easy and convenient, self- adjusting wedges, which provide the tool free installation, and easy attaching of fiber optic cable by hands. Just need to put a appropriate size flat cable on the shell, put the raised embossing shim against cable then insert wedge in shell, at last attach this clamp on drop wire hook or bracket. FTTH drop clamps passed a series of standard related type tests which are available in our internal laboratory, such as +7... -
Competitive Price for fiber to copper converter - G.652D Single-mode optical fiber (B1.3) – GELD
1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of optical fiber include: fiber optical systems requiring low loss and high bandwidth, such as long-distance communication, trunk lines, loop feeders, distribution lines and cable TV, etc., especially suitable for 1383nm band coarse wavelength division multiplexing (CWDM), dense wavelength division multiplexing (DWD... -
Ftth Fttb Fttx Network ODF unit box – GELD
It is an optical fiber wiring equipment specially designed for optical fiber communication room. With cable fixing and protection function cable terminal function, regulating function, and cable core and tail fiber protection function. It can be assembled into an optical fiber distribution frame alone or in a cabinet/frame together with a digital distribution unit or an audio distribution unit. Constitute a comprehensive distribution frame. The equipment is flexible in configuration, easy to ... -
100% Original fiberglass reinforced plastic - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Discount wholesale “Optical Fiber ” - Dipped coated water blocking aramid yarn for cable – GELD
Water-blocking yarn, a new product – porous fiber water-swelling water –blocking yarn used for the water blocking of new types of dry-type optical cables, is developed and produced by the Company based on new water-blocking technologies in optical and electric cable production at home and abroad. It is characterized by advantages like fast water absorption speed, high expansion ratio, strong tension stress, no acid and base, no compatible effect exerted on cables, thermo stability, chem...
